Ted White Ted White's Profile Page

Ted White Ted White

0 Course Enrolled • 0 Course Completed

Biography

Huawei H12-831_V1.0-ENU日本語的中対策 & H12-831_V1.0-ENU関連資格知識

近年、社会の急速な発展に伴って、IT業界は人々に爱顾されました。Huawei H12-831_V1.0-ENUIT認定試験を受験して認証資格を取ることを通して、IT事業を更に上がる人は多くになります。そのときは、あなたにとって必要するのはあなたのHuawei H12-831_V1.0-ENU試験合格をたすけってあげるのPassTestというサイトです。PassTestの素晴らしい問題集はIT技術者が長年を重ねて、総括しました経験と結果です。先人の肩の上に立って、あなたも成功に一歩近付くことができます。

華為H12-831_V1.0-ENU認定試験は、データコム高度なルーティングおよびスイッチング技術の分野での個人のスキルと知識を評価するために設計されています。この認定は、革新と顧客中心主義に焦点を当てた情報通信技術ソリューションの主要プロバイダーである華為によって提供されています。H12-831_V1.0-ENU試験は、最新のデータコム技術における保持者の専門知識を示す貴重な資格です。

>> Huawei H12-831_V1.0-ENU日本語的中対策 <<

Huawei H12-831_V1.0-ENU関連資格知識 & H12-831_V1.0-ENUテスト問題集

H12-831_V1.0-ENU学習ガイドには、PDF、ソフトウェア/ PC、およびアプリ/オンラインの3つのモードがあります。分散した時間を使用して、自宅にいるのか、会社にいるのか、外出中にいるのかを知ることができます。同時に、H12-831_V1.0-ENU学習テストの内容は、暦年の試験シラバスの内容に従って専門家によって慎重にHuawei編集されます。 H12-831_V1.0-ENU学習教材を使用すると、H12-831_V1.0-ENUテストを受ける前に練習するのに20〜30時間しかかからず、98％〜100％の高いHCIP-Datacom-Advanced Routing & Switching Technology V1.0合格率が得られます。

Huawei H12-831_V1.0-ENU試験は、準備にかなりの時間と労力を必要とする挑戦的な認証です。候補者は、高度なルーティングとスイッチングテクノロジーを深く理解し、実際のシナリオに知識を適用できる必要があります。ただし、この試験に合格すると、複雑なデータコムネットワークの設計、実装、トラブルシューティングに必要な専門知識があることが証明されます。

Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 認定 H12-831_V1.0-ENU 試験問題 (Q25-Q30):

質問 # 25
On the OSPFv3 network shown in the figure, area 1 is a stub area. Which of the following statements are true?

A. Default routes exist in the routing tables of R1 and R2.
B. Both R1 and R2 generate Network-LSAs.
C. Both R1 and R2 generate Inter-Area-Prefix-LSAs.
D. Both R1 and R2 generate Intra-Area-Prefix-LSAs.

正解：A、D

質問 # 26
the configuration file of the device. Is the following statement D wrong?

A. Check if the port is added to the correct oneWLAN
B. Check port configuration to confirm enableMSTPWhether the port is enabled with the protocol packet sending command. Such as:bpdu enable
C. Regardless of whether the device is configured with apricotBPDU Tunnel,neither will be correctMSTPmake an impact
D. Port connected to user terminal equipmentMSTPWhether it is disabled or configured as an edge port

正解：C

質問 # 27
What characteristics must a high-risk operation plan have?

A. with verification
B. Strong operability
C. accurate
D. can return

正解：A、B、C、D

質問 # 28
On the OSPF network shown in the figure, areas 1, 2, and 3 are common areas. The IP address of Loopback0 on R5 is 10.0.5.5/32, and OSPF is enabled on the interface using the network command.
ACL 2000 (with the matching rule shown in the figure) is configured on all routers. If the command filter
2000 import is run in area 0 (where R1, R2, and R3 reside), which of the following routers do not have the route 10.0.5.5/32 in their routing tables?

A. R1
B. R2
C. R4
D. R3

正解：A、B、D

解説：
Comprehensive and Detailed In-Depth Explanation:
Understanding the OSPF Network Structure in the Question:
* OSPF Areas & Routers:
* Area 3: Contains R5 (which has loopback 10.0.5.5/32).
* Area 1: Contains R6.
* Area 2: Contains R4.
* Area 0 (Backbone Area): Contains R1, R2, and R3 (which interconnect the other areas).
* ACL 2000 Filtering Rule:
* The ACL rule 2000 explicitly denies 10.0.5.5/32 from being imported.
* The filter 2000 import command applies this filter to Area 0, preventing routes from Area 3 (including R5's loopback) from being learned by Area 0 routers (R1, R2, and R3).
Route Distribution Analysis:
* R5 (Area 3):
* R5 has 10.0.5.5/32 configured on its Loopback0.
* Since OSPF is enabled, R5 advertises the route to R6 in Area 1.
* R6 (Area 1) # R2 (Area 0, Backbone Router):
* Without filtering, R6 would normally propagate 10.0.5.5/32 to R2 (since R2 is a backbone router in Area 0).
* However, since ACL 2000 is applied in Area 0, R2 blocks this route from being imported.
* Therefore, R2 does not learn 10.0.5.5/32.
* R2 # R1 and R3 (Both in Area 0):
* R2 would typically share any learned routes with R1 and R3 in Area 0.
* But since R2 itself does not have 10.0.5.5/32, neither R1 nor R3 can receive it.
* Thus, R1 and R3 also do not have 10.0.5.5/32 in their routing tables.
* R4 (Area 2) is Unaffected:
* Since R4 is in Area 2, it is not directly impacted by the filter applied in Area 0.
* It can still receive the route via another path if redistribution is configured properly.
Final Conclusion:
* R1, R2, and R3 do not have the 10.0.5.5/32 route due to the filter 2000 import command applied in Area 0.
* R4 may still have the route since it is not affected by the filtering in Area 0.
Thus, the correct answer is:# R1, R3, R2 do not have the route 10.0.5.5/32 in their routing tables.

質問 # 29
Regarding the IPSG, which of the following statement is incorrect?

A. IPSG can prevent the host from changing the IP address privately
B. IPSG can prevent IP address spoofing attacks
C. IPSG can turn on the IP packet inspection and alarm function, and cooperate with the network management to perform alarms
D. IPSG is a source IP address filtering technology based on the three-layer interface

正解：D

質問 # 30
......

H12-831_V1.0-ENU関連資格知識: https://www.passtest.jp/Huawei/H12-831_V1.0-ENU-shiken.html

Ted White Ted White

Biography

Quik Links

Quik Links